Category: Using the QEnergySpa

Under the top positive ring and on top of the bottom one as shown below.

Clean the Orb following a session.

It is recommended that you…

• Rinse the Orb (water module) in clean warm water, no warmer than you can handle.
• Place the Orb (water module) in a cleaning solution between 5 – 10 minutes. Please ensure that you use gloves at this stage as no matter which cleaning solution you choose you still need to take appropriate precautions. You may wish to take the Orb apart to clean it but this step is only necessary when changing rings and tracks. You may place the whole Orb in cleaning solution just the way it is.
• Rinse the Orb (water module) vigorously in a container of warm water to wash off any residual of the cleaning solution, or under fresh running water for at least 30 seconds.

Currently there are four (4) recommended cleaning solutions:

Descale Magic – Descaler & Sanitiser;

Glitz – Calcium Scale & Rust Remover;

CLR – Calcium, Lime & Rust Remover; and

Safe A R – d-LYME-it

Please refer to the Manual for instructions on Page 12 – Cleaning the Orb.

 

It is recommended that one replace the rings and track in the Orb once they have eroded by approximately 10% of their original size.  Also if the rings begin to show a great deal of pitting and lose their tensile strength, it is time to replace the rings. The efficiency and health benefit of the electromagnetic field is greatly reduced when the rings are not replaced appropriately.

                  Replacing the ring and tracks at this stage is recommended.

 

No! This is not faith healing and you don’t have to believe in bio-energy therapy for it to work, much in the same way that you don’ t have to believe in physiotherapy for it to work. Although it should be noted that positive thoughts and thinking always assist in any aspects of our lives.

Effectiveness of a ‘good’ source of water.

It is pretty hard to find a true ‘good’ source of water these days. Even in pristine environments, scientists are still finding toxic levels and distilling the water or putting it through reverse osmosis will not eliminate the memory or the energetic properties of the various exposures. Furthermore, it is not just the toxic exposures that concerns us and alters the water; geological factors such as rock formations/mineral deposits affect the water as does geographical factors such as proximity to radio frequencies, microwaves, electrical appliances as well as solar flares, moon activity. Even the pipe (material and dimensions of the pipe) through which the water flows, has a significant effect on the water.

There is no doubt that a ‘good’ quality water source (with least exposures from man-made products/environments) will slightly increase the effectiveness of the session.
It is worth keeping in mind that the QEnergySpa, BEFE acts predominantly on the core structure of the water itself rather than all the added exposures (all though they do affect the outcome slightly). The same goes for the individual having the session, namely the QEnergySpa, BEFE acts predominantly on the core structure of the water within the individual.

Forgot a piece of jewellery, should I complete the session or start over?

Yes it is a good idea to remove metallic items such as jewellery even half way through a session.  Jewellery such as gold, silver or platinum are not a real issue. It is the costume jewellery and quartz battery watches that need the focus. There is no need to start over just remove the jewellery as soon as you notice it if at all possible.